Nissan Titan Brake Upgrade – Reasons, Steps & Vital Tips

Nissan Titan Brake Upgrade – Reasons, Steps & Vital Tips

What are the reasons and benefits of the Nissan Titan brake upgrade? Upgrading your car’s braking system will help you reduce brake distance, improve performance, get higher durability, and saves you with your vehicle. 

Usually, the braking system on the Nissan Titan is well-designed. However, the brake upgrade will entail additional stopping power, which is vital to ensure safe driving.

Suppose you are considering upgrading the Nissan Titan brake but are confused about its positive results. In that case, this post will give a clear idea regarding the reasons and advantages of doing this.

Also, we’ll show you how to upgrade the brake with other valuable tips. So, continue reading and upgrading your car’s brake system.

Benefits You’ll Get From The Nissan Titan Brake Upgrade

Driving fast can be fun, but don’t make it the last drive of your life. Before you learn how to drive fast, you must learn how to keep your vehicle under control. Here are some expected benefits that you’ll get after upgrading the Nissan Titan brake:

  • Safety is everything from the first to the last that an upgrade ensures.
  • Nissan Titan front brake upgrade allows you to brake the vehicle with a heavy load.
  • Upgrading the brake makes it looks better than factory provided one.
  • You’ll get increased performance from your vehicle.
  • It enhances strength and durability.

Nissan Titan Brake Upgrade – When It Becomes A Must?

Typically, you need to replace the brake pads between 10,000 and 20,000 miles to get the lowest stopping issues. The rotors go a little more than the pads. You can replace rotors for every 50,000 to 70,000 miles.

But keep an eye on the brake performance to fix possible problems. Here are some warning signs that will help you decide when you need to replace/upgrade the braking system:

  • Vibration on the steering wheel
  • Whining/Screaming noises from the brakes
  • Grinding sound while driving
  • Stopping is taking longer time than normal
  • The indicator light gets switched on
  • Brake Pads become thinner

Nissan Titan Brake Upgrade –Recommended Products

The Nissan Titan isn’t just well-designed and has massive towing power. Moreover, the factory-provided brake of the Titan is enough to control your driving speed in most situations.

But the braking components get worn out over time, which makes the stopping strength vulnerable. Therefore, it impacts overall safety measures.

Nissan Titan front brake upgrade or any other required upgrades will help you avoid any unexpected situation. In addition, it’ll also improve the engine performance in all aspects. Let’s look at a list of the best options for brake upgrades:

Product’s NameFeatures
Power Stop K7574 Front and Rear Z23 Carbon Fiber Brake PadsImproves the stopping power Made of durable carbon-fiber material Double-layered rubber shims reduce noise
Hart Brakes Front Rear Brakes and Rotors KitAll included brakes with the kit Highly tolerable & durable Solid halting power
R1 Concepts Front Rear Brakes and Rotors KitDurable & stable braking performance Rust & dust protection Well-ventilated & temperature dissipation
SCITOO Brake Kit Rear Rotors and PadsStrong stopping strength  Smooth & noise control Well-designed & durable
Power Stop KOE6520 Rear Brake Kita complete installation brake kit OE Replacement Rotors Stock Performance

 Steps For Replacing Nissan Titan Brake

How to change brakes on a 2017 Nissan Titan? You can upgrade the Nissan Titan brake system by replacing some components, like pads, rotors, drums, etc. Here we’ll discuss replacing the brake pads as they’re more likely to wear and tear.

NOTE: The replacement job requires essential tools and practical experience in car maintenance. If you have these essential things with technical knowledge, proceed to the replacing steps:

First Step – Remove the wheel first, then the slider bolt.

Second Step – Get the caliper up at the ease level.

Third Step – Take out the older brake pads you want to replace.

Fourth Step – Change the retaining clips.

Fifth Step – Get the new brake pads at the older one’s place.

Sixth Step – It’s time to retract its pistons and check the brake fluid levels.

Seventh Step – Relocate the calliper to its previous position.

Eighth Step – Reset the slider bolt and the wheel at the same places you removed from.

Ninth Step – Repeat the steps for another side.

Tenth Step – Perform a test drive in some secure environments.

Tips & Precautions

You’ll get optimum outputs using a brake caliper compressor rather than a C-clamp. A compressor can easily squeeze the pistons, unlike a C-clamp.

Always wear safety equipment, like safety glasses, gloves, etc., when performing a replacement task. They’ll help you protect yourself from potential hazards.

Frequently Asked Questions – FAQs

When Should You Upgrade Nissan Titan’s Brakes?

40000 to 100000 kilometers are the normal range to get the best performance from the brake system. When you ask about the rotors, you can upgrade/replace them after 50000 to 115000 kilometers. The mileage varies for the driving conditions and your driving frequency.

How Do You Enhance The Braking Performance?

You can improve the braking performance by extending the size of the brake rotor. Also, increasing the piston area and the disc radius will help you get higher stopping power. Besides, upgrading the brake components is a great way to avail the optimum brake outputs.

What Reasons For Getting Higher Braking Distance?

The severity of the brake and tire’s worn out is the most significant reason for getting unexpected braking distance. The issue also depends on your car’s speed and the surface types where you’re driving.

How Much Does It Cost To Upgrade Brakes?

Upgrading brakes involves many components, such as pads, rotors, calipers, drums, etc. If you need to upgrade the pads, it’d cost between $150 and $250. But the cost will go up for other related upgrades. The cost of the complete upgrade may require up to $1000 depending on the location, part’s brand, and labor.

How Much Does It Cost To Upgrade A 2017 Nissan Titan Brakes?

The cost of 2017 Nissan Titan brake replacement can cost between $150 and $300 for every axle. The cost can vary depending on the brake type, brand, and availability of labor.

What Type Of Brake Works Most Effectively?

Hydraulic brakes are most effective in stopping a vehicle. Most four-wheel, modern cars have a hydraulic system that provides the highest outputs to control whenever you want.

The Bottom Line 

Nissan Titan brake upgrade ensures the most excellent stopping strength. If you upgrade the brake, it’ll reduce the costs significantly rather than replacing the entire system.

Even if you upgrade the axles, they’ll give you great results. Never compromise the stopping capability of your vehicle to avoid possible casualties.  

Upgrading the brake yourself is an excellent way to save hundreds of bucks. But it would be best if you did not do it until you have the essential tools with enough technical and practical experience.

Scroll to Top